"Whenever I insert my SD card into my computer, I get an error that says SD card damages. Is this normal? If not, I would appreciate it if you can suggest a solution for this."
SD cards help you store data and transfer it to them, between computers and other devices. However, all good things come with a negative aspect. Due to some reasons, SD card damages can happen. This page contains information about SD card damage, how it’s caused, and how to fix it.
SD card damage can be as a result of several specific reasons. Understanding the causes makes it easier to fix the challenge. SD card damage can be caused by the following factors:
SD card damaged physically.
SD card not inserted correctly.
Corrupt or damaged SD card file system.
One memory card used on several devices.
Ejection of SD card from the computer during a transfer operation.
If your device has a removable SD card, it can collect dirt. Sometimes, the solution to SD card damage can be simply cleaning the card. Open your device, eject the SD card, and clean the card, mainly the metallic areas. Insert it back and see if it works.
Step 1. Connect the SD card to your PC and click Start. Launch Command Prompt.
Step 2. In Command Prompt, enter the following command: chkdsk [sd card drive letter]: /r. If therefore, if your SD card letter is Z, enter “chkdsk Z:/r”
The command will scan your SD card damage and repair all errors found.
After the scanning, check if the SD card damage is fixed.
Step 1. Connect the damaged SD card to the computer.
Step 2. Launch Device Manager.
Step 3. Right-click the SD card and click “Disable”.
Step 4. After a couple of minutes, click “Enable”.
Step 5. You may have to restart your machine to see the changes.
Step 1. Open the Disk Management utility.
Step 2. Search for the SD card you connected.
Step 3. Right-click on the SD card when you find it.
Step 4. Click “Change Drive Letter and Paths”.
Step 5. Apply the changes and reboot the computer. Next, connect the SD card to see if it’s fixed.
To fix SD card damage, the software I recommend is AnyRecover. It works so fast and has simple recovery modes that must work for your SD card damage. This robust tool does not only recover files, but it does it efficiently with up to 98% success rate.
1,000,000 + Downloads
Features of iMyFone AnyRecover:
Whether you deleted the file, it got damaged by a virus, or you formatted it, no matter the scenario, AnyRecover will get it back in record time.
Works for over 1000 file types, so it will probably work for yours.
Does not need any tech skills
100% secure recovery tool.
Step 1. Launch AnyRecover and on the screen to select the recovery mode, choose the “Lost Partition Recovery” mode.
Step 2. Select the specific partition to be recovered and click “Next".
Step 3. Choose the file type you want to search for and hit “Scan”.
Step 4. After scanning, the results are displayed on screens. To find out what a file contains, click it to preview. When you are sure of the files, please click “Recover” to get back your data lost to the SD card damage.
Step 5. If the above steps do not work, start again, but this time, in step 1, choose the All-Round Recovery mode. This mode takes more time, but it’s more reliable to find lost SD card files.
There you have it - how to rectify SD card damage. These damages are not rare with SD cards. Now, you are equipped with all you need to know about SD card damage and how to fix it. What's more, with the help of iMyFone AnyRecover, you don't have to worry about data loss.
By Alva Doris , to Hard Drive Recovery
Posted on Oct 21, 2019 ( Updated: Dec 16, 2019 )