How to Fix “Cant Format SD Card” Error on Windows Ultimate Guide

The ability to format your SD card ensures that you are able to store more files on it. Also, it can help get rid of infected files that can cause harm to your system or device over a given period of time whenever explored.

The problem is that there are times when formatting of SD card may not be as straightforward as it ought to. In case you cant format SD card, read the details of this post. It will show you how to do it the right way.

1How to Fix "SD Card Not Formatting" Error on Windows?

1Remove Write Protection / Password from SD Card

One of the major reasons why Windows was unable to complete the format is that it could be write protected. When this happens, you can only explore files without having to format such SD card. You will need to check whether the SD card is write - protected. If it is, there is a switch that you will need to turn off for the password to go out. Your SD card can either be locked or unlocked using a password.

2Fix SD Card Cant Format Error Using CMD

One of the most effective ways to correct an error message which says that windows is unable to complete SD card formatting process is the use of CMD. Through this method, errors will not only be listed on the disk but also corrected. The steps are outlined below:

Step 1. Get the memory card connected to your system using card reader. The option to format will be prompted by Windows. At this point, hit the Cancel button and check properties. You will find where it isn’t able to check disk error.

Step 2. Click on Start > Run and type 'cmd' - 'chkdsk E:/F'. Please note that chkdsk simply stands for check disk. Also, the SD card's drive is represented by "E" while the repair parameter is "F".

Step 3. When the repair is completed, DOS is going to close down automatically. You should be able to see the properties of your SD card at this point.

3Repair SD Card That Windows Cant Format in Disk Management

There are lots of functions which disk management section can help to carry out in your control panel. For instance, you will be able to know the condition of every disk. Below are some of the steps to repair an SD card which can’t be formatted in disk management.

Step 1: Using card reader, connect your SD card to a system. Locate My Computer and right click on it. Now choose Management.

Step 2: On your windows’ left, locate Disk Management and click on it. It will show information about the storage device. Please note that your SD card is the removable device.

Step 3: Get Removable disk clicked on and choose New volume - FAT32. You will be shown a pop-up message indicating that the partition message is successful which means you can go on with your formatting.

disk management

2Reasons That Cause SD Card Cant Format Error

When it comes to having an error which relates to SD card formatting, there are lots of factors which can account for such. It is important you note these variables in order to avoid them as much as you can. Some of them will be listed below:

sd card not formatting

  • If your memory card is write - protected, formatting it will become impossible. At this point, you will need to ensure that the password is unlocked.

  • Also, if your memory card is corrupt or has been infected with virus, formatting it will not be possible. Ensure that it is always virus - free. One way to achieve this is making use of such card on a particular device. Avoid using it on various devices.

  • Finally, a bad sector will cause your SD card not formatting.

3Bonus: Recover Data from Formatted SD Card with iMyFone AnyRecover

Recovering data from your formatted SD card isn’t possible unless you are making use of a powerful and sophisticated tool like iMyFone AnyRecover. This section will show you how to make use of this tool in recovering data from any SD card which you must have formatted.

product

1,000,000 + Downloads

Features of iMyFone AnyRecover:

It can recover any type of lost data. This could be data loss due to virus infection, device crashing and others.

It supports different types of devices like laptop, phones, digital cameras, USB drives and others.

The files supported are over 1000 including photos, audios, videos, documents, emails and so on.

Date recovered is 100% secured.

Recovery rate is very high and effective.

Try It FreeTry It Free

How to Recover Data with AnyRecover?

The use of iMyFone AnyRecover is very easy as it has been designed to be user - friendly. This means that you don’t need any special skills to recover your lost data. Below are some of the steps to make use of this tool:

STEP 1Choose your recovery mode. This involves where you want the data to be recovered. In this case, choose Formatted Disk Recovery mode.

formatted disk recovery

STEP 2Select a location. This could be your hard drive, SD card or any other external drive. Once you’ve chosen your location, hit the button below which says Next.

formatted disk recovery location

STEP 3Choose the type of file you would want to recover from your formatted SD card. These could be videos, audios, photos or others.

formatted disk recovery file type

STEP 4After hitting the Scan button. AnyRecover is going to start the file recovery process.

formatted disk recovery scan

STEP 5Once the process is complete, recovered files will be displayed on your screen, just select the ones that you want and hit Recover.

formatted disk recovery

Conclusion

Based on the above, it is obvious that the problem of cant format SD card can be easily resolved when you know the right steps to take. The good part is that you’ve been provided with all of such steps above. Just ensure to follow them as outlined and your SD card will be formatted. And there is no need to worry about data loss as iMyFone AnyRecover is capable of recovering data from your formatted SD card.

Try It FreeTry It Free

user

By  Alva Doris , to External Device Recovery

Posted on May 28, 2019  ( Updated: May 28, 2019 )

Related Articles: